Making of a Millefiori Bead

What goes into making a millefiori bead? What are they always different? What makes them smooth? and other questions you’ve always wanted to know about millefiori!

First the canes must be made. And since there are many different opaque millefiori slices of canes used in this particular millefiori bead, well there are about 120 opaque canes that must be made by Effetre (and known as Moretti Canes) in Murano. In the picture below, friends at another furnace are making cane glass for us.

Then the canes must be chopped into small pieces. For our bead makers, Effetre does the chopping resulting in large wheel barrows of these slices. Our bead makers buy in 10 kilo (~22 pound) bags. The slices are random, and sometimes they have more of one cane than another, because at Effetre, there is a schedule for the production of canes, and no cane will be made before that scheduled time. (This comes under the heading of, “It’s how we’ve always done it and we see no need to change.” If you truly want the canes out of cycle, then you will need to buy 500 kilo ~1200 pounds.)

So now to the bead making

The slices of canes must be warmed or the bead will crack. This is done by laying them on a small tray beside the torch as the bead maker deftly wraps the melting cane which creates the base of the bead. Then carefully, using tweezers, they place the canes one by one onto the base of molten glass.

In the picture you see first the base and next to it, the base with slices applied, and already you can tell they have put it back into the flame, as the straight sides of the canes have begun to become slightly round. In the third, you see that by holding the bead in the fire, the canes begin to meld together. There is surely a technical term, but you just need to know that the glass flows toward the heat.

At this point, there will still be slight bumps or separations and the bead is not smooth. Here’s where the last secret come in.

The Secret of the Finishing

The Moretti brothers are credited with inventing a technique of “burattatura” a name that came from the use of a wooden barren (buratto) which they turned to smooth and polish the beads – a departure from the time consuming task of polishing with a cork wheel and water which was also expensive and impossible for small beads. They put the beads in the barrel along with sand and water. The sand becomes more sottile (fine) in the process which takes about 7 days and with the final time devoted to the polishing, part of the secret! Even today no one outside the Moretti company knows the exact process they use.

Thanks to our good friend Gianni Moretti for his research and writings as well as his exhibits at the Museo del Vetro in Murano.

Shop our great selection of Millefiori Beads.

Author: VenetianBeadShop

What began as a fascination with the glass of Murano has become a way of life. Our webstore has all you will need to make jewelry, quality findings, stringing materials, Swarovski Crystals and a lot more, but our main focus is the Venetian Glass Bead. We have been an integral part in promoting Venetian glass beads throughout the world as well as helping to breathe new life into traditional Venetian techniques. A few years ago, we introduced our line of Venetian Dichroics to the US through as a result of years of efforts with our beadmakers in Murano. We continue to bring new and innovative ideas to this age old industry. Most recently, we developed the Furnace Glass along with our partner furnace in Venice. It's a blend of old glass making techniques to work with new fashion ideas. We remain a family owned business located in Santa Clara and Sunnyvale, CA, USA where we have been importing Venetian Glass and Murano Glass commercially since 1993. Our wholesale showroom has the largest collection of Venetian Beads on display anywhere. View all posts by VenetianBeadShop