400% Price Increase of Methane (Gas) is Threatening Murano Glass Furnaces

Murano Boat Stop Il Faro

The latest crisis facing Murano furnaces is the exorbitant increase in Methane prices. Methane is the gas used to melt the sand into glass in most of the furnaces in Murano. It is piped under the lagoon directly to Murano.

The latest is a double whammy occurring on the tails of the shut-down for COVID. During 2019, 3+ months of complete lock-down where residents were only allowed outside their house for essential services, grocery shopping, visits to the doctor or the pharmacy. No workers were allowed inside the furnaces. During this time we were fortunate to have a few bead makers who work from their home and could continue making beads.

Tourism died as travel to Italy was not allowed. In fact it was only in the summer of 2021 that US residents were welcomed and then only those vaccinated and with negative Covid tests. Tourist from other reciprocal countries in the European Union were allowed earlier as was the travel between regions in Italy.

But Murano doesn’t receive a lot of money from the Italian tourist, for the most part, the Italian tourist is just on a day outing, perhaps buying lunch at a restaurant, but rarely large works of glass art. The same is true from EU tourist who arrive in the summer holidays with their families, often camping at Jesolo, across the lagoon spending much of their time on the sunny beaches.

Delivery Boat Murano

The tourist who are apt to purchase at the “glass factories” arrived in the past on tours by large tour companies, like Trafalgar, or other organized tours which included visits to various furnaces, especially a tourist furnace on the Island of Giudecca where the tourist were shuttled by boat from Tronchetto directly there. Tourist were also sent by hotels to specific furnaces where the furnace agreed to pay a fee for delivery. This so-called free taxi to Murano often backfired on tourist who didn’t get the point that in return for delivering them to the furnaces, the furnaces expected them to purchase (and not 10 Euro items). So sometimes these tourist found themselves learning public transportation to return to Venice.

Murano

Just as the furnaces were seeing an increase in tourist and sales, the news of the increase in gas prices has skyrocketed, from 0.23 cents to 0.90. A surge of 400%. Consider that the furnaces burn 24 hours a day otherwise the costly crucible inside the ovens will break a broken crucible cost about $2,300 US.

A medium-size glassblowing business consumes ~12,000 cubic meters (420,000 cubic feet) of methane a month to keep seven furnaces glowing at temperatures over 1,000 degrees Celsius (1,800 degrees Fahrenheit) 24 hours a day.

Monthly bills normally range from 11,000 to 13,000 euros ($12,700 to $15,000) a month, on a fixed-price contract that expired on Sept. 30, 2021. Now exposed to market volatility, an increase is projected in methane costs to 60,000 euros ($70,000).

And even those furnaces who are lucky enough to have volume orders from shops, markets abroad are now facing a certain loss on orders they are working to fill as they have already negotiated prices for the orders and those prices did not include this unexpected increase.

HOW DOES THIS AFFECT OUR BEADS?

Unfortunately, this increase in gas prices will manifest itself two ways in our beads. First, the furnace that produces all the glass canes our bead makers uses volumes of gas to keep its furnace glowing with each batch of just one color being about 250 Kilo (~500 Pounds). This furnace provides glass canes to the world. More importantly, it provides all the canes to our bead makers.

The Second Increase

Then, the torches (canello) that the bead makers use all are powered by gas. So they too are experiencing a huge increase each time they replace their cylinders of gas.

Tanks of Gas being delivered in Murano

The Confartigianto, the artisan association has pleaded to government in Rome to assist in negotiating better rates with the alternative that an artist craft active in Murano since 1291 will be in peril. Even now, furnaces are being leveled and hotels rising up. One of the latest to fall to the hotel industry is the old factory of Moretti along Fondamenta Manin just down from the boat stop Colonna. Profits are good for the hotels (not necessarily the workers and certainly not for the population of Murano) and they do provide some jobs and create some tax income for the Italian government. The downside of all this is that once the furnaces close it will be virtually impossible for the island to continue to maintain its place in the world of glass. As of now, already 7 more furnaces have closed.

Bead Making Torch Murano Glass Beads

Murano holds a treasure of artisans, world class glass blowers whose names remain unknown because they just go to work each day and blow glass. They do not think of themselves as artist but they are responsible for the largest part of the glass sold. Murano is a legend in our world of glass – since 1291. I hope that the Italian Government comes to the aid of the furnaces in Murano otherwise Italy will be losing the history of Venice and Murano. Along with one of the reasons that tourist come to Venice.

Venice Glass Week 2021

Murano Early Morning

Venice Glass Week of 2021 was exciting but exhausting. There were so many exhibits, workshops that it would take a month to enjoy them all. There were exhibits not only in Venice, Murano and Giudecca but also in Mestre, the town before the bridge. In all, between open studios, gallery exhibits and events there were 132 listed.

The week also collided with the Venice Film Festival and the inauguration of the Rialto Bridge after its restoration which was paid for by Renzo Rosso (the head of Diesel and OTB – Only The Brave Foundation) .Rosso invited Andrea Boccelli to sing. The city was bursting with energy and the first cruise ship of the year also arrived.

The historic REGATA STORICA was held on 5 September. It commemorates the welcome of Caterina Cornaro in 1489, the wife of the King of Cyprus, who renounced her throne in favour of Venice.

My favorite event of the Venice Glass Week, and every year, is the Boca del Fuoco, a 5K run, in my case walk, around Murano beginning and ending at the beautiful San Donato Church. The 5K winds through the darken streets of Murano and through working glass furnaces. We were 550 people this year, everyone in masks of course, just not the fun ones of Carnevale. The kids were a favorite of the glass blowers who loved explaining how to blow glass to the kids.

View from the Bridge (named for Toffolo an actor born in Murano)

Our starting line was just outside the church on the fondamenta. We all received shirts with our route (you just needed someone to read as it was on the back). First over the bridge and to the EffetreMurano, the furnace that make the canes everyone uses to make beads, the cotise (the chunks that some furnaces use) and of course the millefiori.

Candles lit the way for us and the running team had enlisted the help of the youngsters with lighted torches to direct the traffic. The run is a benefit for the Venice Runners, a local group.

There was music in every furnace, but for those of you who blow glass, you know this. The maestro (who ever is in charge) gets to choose the music, but it is always blaring. It has to be loud for you to hear over the noise of the furnace. You can see on the marvering table a tiny horse that was made for the kids. Nothing serious tonight, just fun.

In the photo below, we are at the EffetreMoretti (now known as Effetre Murano) and the guys are demonstrating how to make zanfirico a cane we use in our beads with a twisted design inside the transparent canes. Bead makers sometimes pull their own canes, but here it is industrial, pulled 15-20 feet long.

Pulling Zanfirico Canes

It is pretty clear that furnaces are not glamorous, they are hot and dangerous.

Tagliapietra Furnace near Il Faro

Take a look below at the beautiful vases. The glass blower is making a fazzoletto, a handkerchief vase, named because it looks like someone holding a handkerchief.

Making a fazzoletto vase

After we ran/walked the 5K, we returned to the garden behind the San Donato church where these dedicated group had prepared food for 550 people. We ate pasta and fried fish and vegetables.
The end to another great Venice Glass Week, even if I didn’t win the raffle.

Our brave Chiefs – Thank you! and See you next year!

The Differences between Mouth Blown and Lathe Blown Glass

Many people think traditional mouth blowing glass is synonymous with glassblowing but that’s only a type of it. A more precise method to create glass apparatuses known as lathe blown glass has also gained the attention of many bead enthusiasts. 

And this is why here’s a complete guide by us on mouth-blown and lathe blown glass and differences between them. But before venturing into the main topic, let’s gain some knowledge about glassblowing. So here we go!

What Is Glassblowing?

  • It is a glass-forming technique where molten glass is shaped by blowing air into it through a long metal tube. More precisely, in this technique, the molten glass is inflated into a bubble with the aid of a blowpipe.
  • This method of glassblowing has been there since its development in the Middle East around 200-300 BC. Even in the 21st century, glass-blown products have retained their spot of being an essential part of everyday life. It does so by taking part in the production of numerous innovations and art forms.
  • It is said that the first glass-blown products were glass tubes, glass rods, and tiny blown bottles. These products were found dumped at a ritual bath in Jerusalem. 
  • The art of tube blowing is much more than just an experiment done by glassworkers, it is a revolutionary step that induced a change in conception and a thorough understanding of glass. A person who performs the work of blowing glass is called a glassblower.

The art of glassblowing is basically of two types. The first type is called Mouth blowing which is used globally for creating decorative and utility-based pieces. The other type is called Lathe blown and is not very common as it is mainly used for laboratory and scientific glass production.

Having proper knowledge about these methods can make you understand the process of glass-production better. So, let’s learn about these types in more detail.

What Is the Mouth Blowing Method?

  • This is the most basic and oldest method of glass design. It is also considered the original method which helps in working with the glass. 
  • In this technique, the artist places a heated and molten glass at the end of the blowpipe. This end of the blowpipe is known by many professionals as “gather”. This blowpipe is then carefully rotated and inflated. It is done while maintaining the proper temperature of the gather and incorporating air into the glass. This allows the glass to get the intended shape.
  • Now, the glass needs to be removed. An iron rod is used to free the vessel from the blowpipe. Once the process is done, the vessel is heated again and further clarifications are made to the shape and form.

Each piece of mouth-blown glass is unique due to the beautiful irregularities made by rapid heating and cooling. The mouth-blown beads are extremely alluring and are meant to give an elegant touch to its wearer.

If you need one such bead to enhance your beauty, we recommend you Venetian Bead Shop’s Blown Murano Glass Round Gold Foil as they are authentic Murano blown beads, completely hollow inside with the signature Ca’d’oro appearance. These are designed for focal beads and are also often used in Christmas ornaments or decorations.

If you want to buy something luxurious, you should go for Red Filigrana Orchid with an Orange Long Stem. These are formed by combining the flowers made of Murano Glass Red Filigrana and clear Stems of Boro. Group a couple for a beautiful display of flowers that require no watering and don’t wilt on a hot day.

What Is Lathe Blowing Glass Method?

  • This is a complex technique to make some of the most reliable, durable, and accurate pieces of scientific apparatus. The lathe glassware is found almost in every laboratory. The most important work of Lathe is to grab and rotate glass tube or rod during the glass fabrication process.
  • To create a super-efficient lathe blown glass, a glass blower commences with a molten globule of glass from a furnace and shapes it into containers and artistic objects. To make scientific apparatus, the glass blower begins with an existing piece of specialist glass equipment and modifies it into the required shape.

Differences Between Mouth Blown And Lathe Blown Glass

Application :

The decorative mouth-blown glass pieces in someone’s bedroom or living room come from a technique that requires one to take a piece of molten glass and use a glass mold or blow tube. These are used for ornamental or decorative purposes. 

While lathe blowing is a newer more precise method that is used to create sturdy lab and science glass products.

Material Used:

Compared to the normal globe of glass used in mouth blowing, lathe blowing uses a special kind of glass known as borosilicate glass.

Technique:

In case of mouth blowing glass, the artist molds the glass by blowing into the tube while rotating the glass to shape it. Depending on what the artist is creating, he may need to gather more molten glass to add to his creation. Once shaped and molded, the artist then trims the glass and removes it from the blow tube.

Now unlike mouth blowing, lathe blowing uses a machine to create and either a handheld or machine guided flame to mold the glass.

Parting Notes

Get yourself beautiful blown glassware and add a level of sophistication to your room or lab. If you wish to buy more blown Murano beads, you can browse for the same at our store. At Venetian Bead Shop, you will get a variety of options of beads that are mouth-blown using transparent Murano glass.

<p id="For more information, kindly visit our website or contact our supportive staff. We’ll get back to you in no time.

Lampwork beads – How are they made?

Beads have been used for generations to make necklaces, rosaries, and other pieces of jewelry. While traditional beads are adorable, lampwork beads go a step above in adding aesthetics and enhancing the overall appeal of the jewelry. 

Despite their exquisite nature and unique heritage, few people are aware of their origin and building process. This necessitates shedding light on several topics such as ‘How lampwork beads are made?’ and so on. So without any further ado, let’s get started!

All the components needed to make lampwork beads

What are Lampwork Beads?

To know what Lampwork beads mean, it’s important to know what ‘Lampwork’ and ‘beads’ mean separately. So beads are small pieces of glass, stones, or similar materials that are threaded together to make jewelry or some other items. 

<p id="On the other hand, lampwork is a glasswork technique where a torch or lamp is used to melt the glass. And once the glass is in a molten state, it is shaped using hand or tools. 

So that means lampwork beads are those beads that are made using lampworking techniques. As these are mostly handmade, intricate designs and fascinating details are some features they are heavily endowed with. 

Why are Venetian and Murano Lampwork beads famous?

Whenever we hear about ‘glasswork’, the mention of Murano is bound to take place. This is because glass making is widely practiced in Munaro and the artists and workers belonging to this place have acquired distinctiveness in glasswork. The Muranian glass work is inspired by Venetian glass artists. 

One might wonder whether such beads can be copied by manufacturers in China or some other countries. Well the answer is Yes, they can be copied, however, there are several qualities of such Muranese beads that are difficult to be replicated, such as usage of Effetre glass canes (which are produced only in Murano). 

Likewise, the tools used, and most prominently the traditional Venetian techniques are hard to replicate too. 

All the mentioned factors make it a unique product which is endemic to Murano and some other areas where Muranian artists could provide their help. 

And this is why at Venetian Bead Shop, we are a family-owned business in Santa Clara, CA, USA where we have been importing Venetian Glass & Murano Glass since 1993 and we work directly with the bead makers of Venice Murano which makes us able to provide the best Venetian & Murano lampwork beads in USA and worldwide. 

What do you require to make Lampwork beads?

Every special thing requires unique efforts. The same holds for lampwork beads as well. It is important to source the required materials and tools before starting to make the Lampwork beads. Here are some of them-

  • Bench Burner

This is a device that produces heat and flames which is essential in heating and shaping the glass for making beads.

  • Hand Torch

You’d be dealing with intricate detailing and fine objects while working on beads. This makes a hand torch indispensable as using it you’ll be able to focus on different small and intricate particles of beads.

  • Marver

A marver is one of the most important tools when it comes to glassblowing. It is generally made of polished steel, brass, and attached to a metal or wooden table. However, when it comes to using them in a process requiring fine application, a hand-held version of the same could be used. Overall, it is a flat slab of metal or stone or wood on which glasswork is rolled, shaped and cooled. 

  • Reamer

A reamer is a rotary cutting tool used in metalworking. They are used for finishing or enlarging a hole on a metal. A reamer may seem the same as a driller, however, while a driller ‘makes’ hole on a solid surface, a reamer on the other hand, finishes or works upon the existing hole to leave smooth sides.

  • Tungsten Pick

Tungsten is a hard metal that is used in making light bulbs and its extreme temperature resistance makes it ideal in glasswork or anything that requires dealing with high temperatures. There are several applications of Tungsten in bead making such as raking (dragging glass), boring holes, and others. 

  • Mandrel

A mandrel is a cylindrical shaped rod around which metal or some other material is shaped or forged. Essentially, you’ll be using this device the whole time in making Lampwork beads.

  • Glass rods

These glass rods would be your primary raw materials. You’ll have to melt them to make beads.

How to make Lampwork Beads

Now we’ll directly shift to talking about how lampwork beads are made. We have tried to break down the steps involved into pointers. So here we go:

  • First of all, melt the glass rods over a torch and bring it into its molten state.
  • Now wound the molten glass carefully around the steel mandrel. The hole that we see in beads is formed due to the space taken up by these mandrels.
  • Now you have to give a shape to the molten glass by rotating the mandrel and holding it in various positions. The gravity and rotation given by you would help the bead in getting your desired shape. Now, as a beginner, you’ll not be certain about how hot the glass needs to be when it should be rotated or when to apply pressure. Needless to say, you’ll know the same gradually as you begin working regularly.
  • You can add decorative embellishment and colors to adorn the beads. Overtime, you’ll learn how different colors, tools, and metals react with glass to form beads.
  • You can also use marble tools, paddles, and marvers to give the glass the desired shape. Just make sure to keep the mandrel spinning and glass hot. 
  • At last, you’ll need to carefully ‘anneal’ the beads. Annealing is a process of cooling down the glass, reducing stress, and avoiding thermal shock to the glass bead.

Overall, we can say lampwork beading requires a great deal of patience, precision, and skill sets. With practice and proper tools, you can make your own designer Lampwork beads. 

Now if you wish to buy traditional Venetian and Murano Lampwork beads, you can browse for the same on our store. At Venetian Bead Shop, we provide over 6000 different colors and styles of traditional and modern Venetian glass beads. Do visit our store, we are sure you’d be delighted seeing the variety we offer.

Thanks for reading!

5 ways you can make use of the leftover beads

Only a bead stringer would understand how difficult it is to complete a bead work without leftovers. How many times have you added beads to your bead soup stash? You don’t want to dispose of them, but you aren’t sure what to do with them.

Did you know that with little effort you can turn leftover beads into a piece of different jewellery or craft altogether? Yeah, you wouldn’t have to tuck them away hoping that you could use them one day. 

In this article, we have compiled a list of unique crafts & pieces of jewellery that you can make with your stash of leftover beads:

#1 Make Bead Bottle Crafts 

If you have a pile of leftover beads, you should think about making Bead Bottle Crafts. But yeah, you would have to spend some time to sort the beads based on their colour. Once you are done with the sorting, get a transparent glass bottle and start pouring the beads in layers into the bottle. You can play with the thickness of each layer & colour combinations until you are left with a beautiful design.

#2 Create Ornaments

Yeah, you heard it right. Leftover beads make excellent materials for pendants, earrings & bracelets. 

Make a Pendant

Did you know that you can make excellent pendants for necklaces from leftover beads? All that you need is a headpin and a round chain nose plier.

Get a skinny head pin with a thickness that’s enough for the beads to string. Pick the beads that you want to make a pendant with and string them on to the headpin. Make sure that the bead in the bottom is fixed against the head of the pin. Using a round chain nose plier make a wire loop over the pendant. 

Make Earrings

Custom made & designed earrings from leftover beads are an excellent gift option to your friends or family. Choose the best beads from your stash and whip up a great pair in no time.

If you are into the jewellery business, you can even add these earrings as a complimentary gift with each purchase. Your customers would love it and it won’t cost you much.

Make Bracelets

Not just earrings, bracelets from leftover beads to make a piece of fabulous jewellery that you can wear. All that you need is a stretch cord, embroidery scissor, bead stopper, some glue and beading needles.

  • Cut a length of a chord that’s 4 inches more than the desired bracelet length. Fix a bead stopper 4 inches from one end of the chord.
  • String the beads from your stash onto the elastic cord. Make sure that you check the length of the bracelet. You don’t want it to be too tight or too loose. Also, ensure that the last bead you string has a hole large enough to hide a knot in your beading cord.
  • Hold the beards away from the knot and use a drop of glue to secure the knot. Use embroidery scissors to trim the end close to the knot.

Making pieces of jewellery with leftover beads is a lot easier, if you have the right tools for the job.

Get the right tools for bead projects

How to identify the right tools for bead projects?

#3 Make Some Garden & Home Décor Products 

If you haven’t thought of it, leaf over beads makes excellent home décor products. With little patience and the right tools, you can add beauty to a lot of things in your home. For instance, if you have leftover glass beads, you can make bead curtains out of it. There are a lot of tutorials that are available online. As said, all you need is patience.

Else you can also make small home décor products like beaded pots for indoor plants or beaded napkin rings. Look around, and you can see a thousand options.

  • Making a Napkin Ring

Napkin rings are an excellent home décor item. All you need is 18-gauge wire, a wire cutter, leftover beads & a plier. Cut approximately 20 inches of wire and make a small ring in one end to prevent the beads from falling. String the beads onto the wire in any pattern that you want to. Once you are done with it, make a small ring on the other end too.

Wind this beaded wire around a glue box or any cylindrical bottle and your napkin ring is ready!

  • Beaded Wind Chimes 

Wind chimes are always a thing of beauty. Did you know that you can make a beaded wind chime with some leftover beads, thread, and an old coffee container? Yeah, it’s easier than you imagined. Simply make a bead chain with leftover beads & some fishing line. It would be great if you can string some seashells, clay models or glass beads to it. 

Once you are done, secure it to a hanging pot in your garden, tree branches, windows or anywhere you choose to.

#4 Prepare a Bead Repair Kit

Finding the right spare for repair is a nightmare for bead workers. you never know when you might have to repair a broken bead from a piece of jewellery. Though spares are available in the market, you wouldn’t want to buy a whole tube or string of beads when you probably just need a few.

This is where a bead repair kit comes in handy. You can keep a few leftovers after every project in a container and label them. So that the next time you need a spare, you would know where to check for it.

#5 Donate the leftover beads or conduct workshops

If you have a lot of leftover beads, you can think about donating them to art classes or schools. Else, you can even conduct a one-day art workshop for kids who are interested in beadwork.

To Sum Up

These are some of the ideas on what to do with leftover beads. Remember that beads are highly versatile, and there is a lot you can do with them! 

You can also visit our website for more information on beads and bead crafts. 

Bead Pendants and Other Creative Ideas To Use Leftover Beads

After making gorgeous bead necklaces or other Venetian Jewelry, you’ll often find yourself with leftover beads. When your bead soup is starting to overflow, there’s only one thing to do: give those leftover beads a new life. Sometimes, a pile of unused beads can seem like an obligation that’s calling to you. Instead, you should see them as an opportunity. Since you don’t have a specific plan as to how to use your leftovers, you can do anything imaginable with them. One of the most flexible choices is to transform them into bead pendants. 

Turn Your Leftover Beads into New Art

Leftover beads tend to vary in size, shape, style, and quantity. That’s why we’ve crafted a diverse list of possible applications for your new beads, so you can find a suitable project no matter the shape of your stockpile. If you have a few leftover beads to put to use, then you should consider making some beautiful bead pendants. On the other hand, you might have accumulated a stock of leftovers so large that you need a more ambitious project. In that case, you can weave your extras into an intricate beadwork tapestry. 

Bead Pendants

No matter the number or style of beads you have available, you can always make a charming bead pendant. With just a few extras, you can make a charming, minimalistic work of art. If you have more leftover beads to work through, then you can create more flamboyant pendants. You can even go so far as to convert a large box of bead soup into dozens of pendants and wear a new one each day of the month. No matter your ultimate goal, you have plenty of options and the process is easy. There are many online tutorials on making bead pendants, but the basic steps are straightforward.

  1. Select your beads and head pins based on your desired look
  2. Slide the beads onto the head pin and string them together
  3. Use a set of round chain nose pliers to bend the top of the head pin
  4. Make a wire loop and wrap the wire ends together

Voila, you’ve completed your bead pendant. Now, you just need to choose an appropriate material to string your pendant onto and you’ll be enjoying your one-of-a-kind work of art.

Beaded Coasters

Beaded coasters are a simple, functional way to put your leftover beads to work. All that you need to do is string your beads together, place them in a spiral pattern, and secure that shape with craft glue. There’s no limit to the colorful patterns you can design. However, it can often be tricky to visualize a spiral design since they’re not as common as others.

Before moving forward with the stringing process, consider arranging your loose beads in a spiral pattern to get an idea of what the coaster is going to look like. Think of it as the beadwork equivalent of making a sketch before proceeding with the final work. From there, you’ll work from the center of the set of beads outward while stringing them and you should accurately replicate your starting design. 

Make Bead Earrings

When your leftover beads are less quantity, more quality, consider using them to make stunning bead earrings. You mostly need basic materials like round chain nose pliers, wire cutters, and beads, but earring hooks and endpins are necessary too. Your endpin resembles a short, stiff piece of wire that you’ll need to cut to your desired length. You’ll use it to hold the beads and add them until there’s about 1/2 cm. to 1 cm. of extra space on the pin. Then, you bend the endpin at a 90-degree angle halfway through the empty space. This hook will hold your earring hooks.

Custom Bead Ornaments for the Holidays

Have any red, green, and white beads laying around? If so, then you have your work cut out for you when it comes to making Christmas ornaments. You can easily incorporate other colors and interesting stylistic touches based on what extra materials you have laying around, as well. Depending on your religion, you might make a star of Bethlehem to hang from the Christmas tree, a beadwork menorah, or anything else. Beadwork is all-inclusive, after all.

Craft a Bead Bracelet

Bead bracelets are one of the most popular forms of bead art for good reasons. They’re easy to make and easily tailored to your whims and preferences, and you can make beautiful bracelets with any leftover materials. All that you need to do is string beads onto a piece of wire, and then secure the ends with a crimp bead. You can design your bracelets so that they’re tightly packed with beads, or you can adopt a looser approach that leaves more movement between beads. The decisions are yours to make. 

Freeform Bead Art

If you have a large supply of beads to burn through, why not use them all at once in a freeform bead art design? By applying the Peyote stitch technique, you can turn any number of beads into an intricate brick wall pattern of colors and shapes. This stitching technique is highly prevalent in Native American artwork, but it’s been independently discovered in many different cultures around the world. That’s because it’s fairly simple and still offers remarkably attractive results. If you have a large pool of leftover beads to work through, then embrace the freedom that leftover beads offer you and craft a beadwork tapestry. 

Find the Right Tools with Venetian Bead Shop

No matter the bead project, you always need to make sure that you have the right tools on hand. Specially designed bead tools have the precision to allow you to work gently with your beads, as well as many quality of life features. Find all the tools and materials to elevate your beading passion to the next level with Venetian Bead Shop. We stock tools from respected, prolific brands such as Wubbers, and carry all the crimp beads and craft wire you could ever need. 

What Are the Different Types of Murano Glass Beads?

With an endless array of stunning colors and unique designs, Murano glass beads are a beautiful choice for many different types of jewelry.

If you’re new to the world of these gorgeous beads, there are several different types that each have their own distinguishing features.

Read on to learn more about the variety of Murano glass beads available so you can decide which style suits you best.

A Brief History of Murano Glass Beads

These beautiful beads are known worldwide for their stunning colors and clarity. The beads were originally called “conterie,” which is a word that originates in Venice. You may also hear these mystical beads referred to as Venetian glass beads.

For centuries, these stunning beads have been worn as jewelry in may forms. Whether it’s a pair of earrings or an elegant necklace, the wealthy could be seen sporting Murano glass jewelry hundreds of years ago.

The history of these beads is hard to decipher, but many indigenous tribes have been known to wear them. Because of colonization by the Spanish, French, Dutch, and English, the beads were given to the natives as gifts or tokens of peace.

Some historians believe that Murano glass beads were given to tribes in order to take them over and conquer their native lands. Others feel they were given as a token of friendship. Regardless, it’s clear that Murano glass beads have been a part of the world’s history for many, many centuries.

Seed Beads

Thanks to their tiny seed-like size, seed beads are a wonderful choice for jewelry making. These tiny glass beads come in a myriad of colors that range from sunny yellows to rich reds and vibrant blue.

Seed beads are crafted using a long, thin rod made of hollow glass that can be several yards in length. The maker cuts the rod into tiny pieces, and the small hole in the middle makes it easy to string to make bracelets, necklaces, and more.

After the seed Murano glass beads are cut, they are fired until the glass starts to soften slightly. This process is what gives the tiny beads a smooth, rounded edge and helps to remove any leftover glass or rough edges.

Once the beads are cooled, they’re hand-cut and might be made in slightly different shapes and sizes. The beauty of seed beads is that authentic ones have a unique appearance as opposed to mass-produced beads.

Every real Murano glass seed bead has its own unique look. The itty-bitty beads are perfect for making dainty and colorful necklaces and bracelets since they’re easy to string.

Chevron Glass Beads

The first chevron glass beads were made in Venice and Murano, Italy near the end of the 14th century. You may also hear chevron beads referred to as rosetta or star beads.

Chevron beads start out as glass canes that are shaped using star-shaped molds and often contain several layers of alternating colors. Most Murano chevron beads have about six different facets, but older designs may contain four to size layers of color.

Today, these intricate beads are still made in various regions of Italy. What makes these stunning beads so unique is their multiple layers of colored glass. The cored of the bead consists of a molten ball of glass called a gather that is melted in an extremely hot furnace.

Once the glass is melted, the glassmaker blows an air bubble into the center using a blowpipe to create an opening. This opening is what makes the colorful glass design a bead used in jewelry making.

Chevron beads were first used by Dutch merchants as far back as the late 15th century. Many of the first beads were exported to West Africa and the Americas and featured layers of white, blue, and red or green, black, and yellow.

Lampwork Beads

Perhaps one of the most well-known styles of glass beads, lampwork refers to the Venetian addition known as “lume,” which translates to “at the lamp.” These unique beads are worked directly over a flame, and the same technique has been used to make them for thousands of years.

Lampwork beads can have an elongated, ovular shape or they may be stout and round. You can also find Murano glass lampwork beads made in squares and many other designs.

The labor-intensive process to make lampwork beads involves first creating the core of the glass bead using a furnace to melt the material. Next, the delicate bead is re-heated using a lamp (or blowtorch today) to create fine wisps of colored glass.

As the heated glass begins to soften, artists delicately move sections of the glass away from the core to give it multiple layers of color and texture. Additional pieces of glass can be added to create a new design and more color to the bead.

Beautiful Beads of Glass

From tiny seed beads to lampwork and chevron, there are plentiful styles of Murano glass beads to choose from. This age-old process involves a skilled hand and a dedication to the craft to produce awe-inspiring jewelry.

With a rich history, it’s easy to see why these stunning beads are still so popular today. Whether it’s a seed bead necklace or a lampwork glass bead bracelet, nothing compares to the beauty of authentic Murano glass.

To shop our selection of beads and much more, visit our website or contact us today for more information about our beads and accessories.

Beads Millimeters to Inches Conversion Chart

When you start making jewelry for fun or as a business, you’ll probably wish (not for the first time) that you were taught the metric system instead of the imperial as a kid. 

Sure, most of us learned it temporarily for science class in high school, but all that has made it’s way far out of our brains. 

Which means you’re probably googling millimeters to inches conversions every time you go to buy beading supplies online. 

And while we can’t make you learn the conversions for good, we can help you out by putting everything you need in one place. Read below to get the conversion chart you’ve been missing – and some millimeter to inches tips and tricks! 

Metric System Reminder

If you’re just looking for the plain conversions, go ahead and skip this section. But if you’re one of those people that needs to know why something is the way it is, here you go. 

The metric system makes a lot more sense than imperial. Why? It’s all based on units of ten. 

The middle form of measurement is a meter or a gram (for our purposes). A Deci-meter is 10x smaller than a meter, a centimeter is 100 times smaller than a meter, and a millimeter is 1000 times smaller than a meter. 

Basic Conversions 

  • 1 Meter = 39.3 inches
  • 1 Yard = .91 meter
  • 1 Foot = .30 (30%) meter
  • 1 Inch = 2.54 centimeter
  • 1 Inch = 25.4 millimeter
  • 1 Millimeter = .04 inch (4% inch)

The Millimeters to Inches and Inches to Millimeter Formula 

If you’re old-school and you like to put things on pen and paper (and don’t want to print this article out), here’s the formula for converting inches to millimeters, and mm to inches. Since 1 inch is equal to 25.4 millimeters, you want to write that down. 

The formula you need to convert the two is:

D(mm) = D(inches) x 25.4

In plain English, that’s the number of millimeters equal to the number of inches, multiplied by 25.4. 

Let’s go through an example. Let’s say you have a bead that’s 10 millimeters, and you want to know how big that is in inches. 

You would set up the problem as: 10 = x * 25.4

Then you’d pull out those old algebra skills and divide the right side by 25.4, then the right side (10/25.4). 

Once you did the math, you’d get the answer 0.394, which tells you that 10 millimeters are about 40% an inch – or about 1 centimeter. 

Millimeters to Centimeters 

Since you probably know what a centimeter is off the top of your head better than a millimeter, let’s go over that conversion. 

Don’t worry if you’re not a math person – there’s a chart you can copy down or print out of all these conversions at the end. We’ve even added in a chart that shows you how many beads you need for certain necklace lengths (which are in inches, thankfully). 

Want to know about ring sizes conversions from standard size into millimeters? We have that too. It’s all below! 

MM to CM Formula

Since the metric system is a lot easier than the imperial, this formula is easier than the last. To find out the number of centimeters in a millimeter, take the number of millimeters and divide by 10. 

That’s it! The official formula is: CM=mm/10

To put it another way, there are 10 mm in one centimeter. Yes – a mm is that small! 

Working Jewelry Conversion Charts 

Okay – if you just scrolled down here to get to the easy part, that’s okay. 

We’ll start with general conversions, move to bead size, then do necklace lengths. 

General MM to Inch Conversion Chart 

  • 1 mm = .03937 in (1/25th)
  • 2 mm = .07874 in (1/16th)
  • 3 mm = .0.11811 in (3/32)
  • 4 mm = 0.15748 in (1/8th)
  • 5 mm = 0.19685 in (3/16th)
  • 6 mm = 0.23622 (approx 1/4)
  • 7 mm = 0.27559 (1/4 +1/16)
  • 8 mm = 0.31496 (5/16th
  • 9 mm = 0.35433 (approx 3/8)
  • 10mm = 0.39370 (3/8 & 1/16)
  • 10 mm = 1 centimeter
  • 11 mm = 0.43307 in (7/16th)
  • 12 mm = 0.47244 in (approx 1/2)
  • 13 mm = 0.51181 in (1/2 & 1/16)
  • 14 mm = 0.55118 in (9/160
  • 15 mm = 0.59055 in (approx 5/8)
  • 16 mm = 0.62992 in (5/8)
  • 17 mm = 0.66929 in (11/16)
  • 18 mm = 0.70866 in (approx 3/4th)
  • 19 mm = 0.74803 in (3/4)
  • 20 mm = 0.78740 in (approx 13/16)
  • 21 mm = 0.82677 in (13/16 +)
  • 22 mm = 0.86614 in (approx 7/8)
  • 23 mm = 0.90551 in (7/8+)
  • 24 mm = 0.94488 in (15/16)
  • 25 mm = 0.98425 in (1 inch)

Beads Per Strand 

While it’s nice to know exactly the size of the bead, here’s a good idea of how many different size beads you need per strand (on average).

There are four common lengths of necklaces, 16 inches, which s a little longer than a choker, a 20-inch strand that reaches mid-decolletage, a 24-inch strand that lands in the middle of the chest, and a 36-inch strand that reaches to about the bottom of the breasts. 

Please note that different body sizes determine where each necklace length sits on different people. It’s common to offer necklace extenders on your website so that everyone can wear the size of their choosing. 

16 Inch Strand

  • 136 – 3mm
  • 67 – 6mm
  • 40 – 10mm

20 Inch Strand

  • 169 – 3mm
  • 85 – 6mm
  • 42 – 10m m

24 Inch Strand

  • 203 – 3mm
  • 102 – 6mm
  • 61 – 10mm

36 Inch Strand 

  • 305 – 3mm
  • 152 – 6mm
  • 92 – 10mm

Ring Size Conversions 

It’s relatively uncommon to use our beads to make rings, but if that’s your art form, we support it. 

MM to Ring Size 

  • 5 = 15.6mm 
  • 6 =16.6 mm
  • 7 = 17.2 mm
  • 8 = 18.1mm
  • 9 = 19.1mm
  • 10 = 19.7 mm

Millimeters to Inches Made Simple 

As a budding jewelry artist, we hope that our millimeters to inches and more guide made things simpler for you. 

Feel free to print this page for your workstation, and browse our site for your bead-related needs! 

We have jewelry making kits, wholesale beads, Murano glass beads, and more! You can find everything you need to make your own jewelry (including completed pieces) to everything you need to start an Etsy shop on our site. 

Wondering how to make great jewelry? Read our blog for more information! It’s filled with more helpful articles like this that will take you from beginner to expert in no time. 

Celebrating 25 Years @VenetianBeadShop

La Fenice Glass Furnace

Taking a walk down memory lane, 25 years ago in August we made our first buying trip to Venice. Now why our Italian son-in-law never thought to tell us that Italy is “Closed” in August is still a mystery. We arrived with our little indexed list of glass blowers, indexed by location and type of products all worked out with the Italian Trade Commission in Atlanta in the preceding months. No Waze or Google maps just our printed maps of the city which really didn’t have a lot of detail, so we drew them as we explored and our limited Italian language.

Making Beads

Just one night in the oven of a hotel where we stayed sent us searching at the Information Office for hotels with air conditioning a rare find in the early 90s in Venice. We discovered the Lido, a couple of hotels which were only open in the summer, catering  to the French and German tourists, which of course led us to discover the necessity of the vaporetto and restaurants on Lido where we still enjoy eating.

Alessandro Barbaro Maestro – Effortless Beauty and Perfection

So in the early morning we would head to Murano with our lists, only to discover most of them were closed. But there were a few wonderful suppliers who were gracious, though they were probably wondering about the crazy Americans who came in August. We still work with some of those suppliers. And I am sure many of our early suppliers thought we would be there once and never come back. Fooled them!

Effetre Glass Canes for Beads

They say love is blind, and luckily so is the love of Venice and Murano where we fell as they say head over heels in love with both the people and the glass. It has been a journey of discovery, joy and pain and fierce friendships.

Even Flat Stanley Enjoys Venice

We did not begin buying beads, that came later. We began with glass from the furnaces, vases, bowls and bottles, figurines, clowns (by the hundreds). While we bought these, we actually had little idea of how to sell the products. We had spent a lot of time learning about importing, customs duties and even attended a college class on importing. We researched the market and knew there were few people in our area who carried any Murano Glass.

Growing and Organizing

But selling it? We made the rounds of school events, church events, and yes, even flea markets. But we read in the paper, you know those things we all used to read in the morning with our coffee, that there was quite a well known Gem and Jewelry show in a town nearby, 3 days only, and 3 times each year. So on Friday afternoon, we went to the show to get a look and explore future show possibilities. The show promoter said, well I like what you have and it so happens that we have a booth where the vendor did not show, so if you can be here ready at 10 tomorrow am, you can have the booth.

My Favorite Red

That began a very long night of pricing our products, and amazingly, we sold almost everything we had. At the end of the show, the promoter came and convinced us to sign up for his next show, so now we had 3 months to get more goods….well that called for another trip to Venice, Italian classes and our house became a warehouse packed with beautiful Murano Glass.

To be continued…..

Inventory Shows – Or Notify when Available?

Well after months of telling everyone we were going to implement Inventory on VenetianBeadShop.com. we DID it!

It may not be pretty for a short while as we sort out any inaccurate stock counts here in our warehouse. But it just gets better as we work on it. So ever so often, a product may say it has inventory – but alas when we get to that bin, well it either as miraculously gotten legs and climbed into another bin or we just do not have it.

Inventory Shows on the Product Page

Inventory Shows How Many Are Available

But What happens when we are out of stock?

Well there are 2 things. It we never expect to get it again, it simply disappears from the site. This happens for many reasons, all having to do with suppliers. Sometimes a supplier simply retires or worse! Sometimes the quality of the supplier or delivery is unreliable and just working with them is too hard, so we move on!  But it we are only temporarily out of stock. Here’s how it looks!

Out of Stock Items – Add Me to Waiting List

What happens when stock arrives?

When new stock arrives and is received into our inventory, you will automatically be notified that it is available. You will get an email notifying you. Then it’s 1st come 1st served! Inventory is adjusted daily.

HUGE NOTE!

Adding an item to your Basket or Wish List or Saved Basket does NOT reserve the item for you. It is only yours when you place the order. Up until then, someone else can swoop in and buy all we have!

The Small Print

Occasionally, even when we say we have stock, there are circumstances where we will not have the quantity. Sometimes when we are picking, we discover defects in the beads, or if we are matching sizes for you. we may not have the quantity in matched sizing. Since our items are all handmade, there will always be little issues. 

Exit mobile version
%%footer%%